Initial commit — Antergos NeXT

airootfs/etc/dracut.conf.d/antergos-defaults.conf

@@ -0,0 +1,2 @@
+omit_dracutmodules+=" network cifs nfs nbd brltty "
+compress="zstd"

airootfs/etc/environment

@@ -0,0 +1,7 @@
+#
+# This file is parsed by pam_env module
+#
+# Syntax: simple "KEY=VAL" pairs on separate lines
+#
+BROWSER=firefox
+EDITOR=nano

airootfs/etc/group

@@ -0,0 +1,8 @@
+root:x:0:root
+adm:x:4:liveuser
+wheel:x:10:liveuser
+uucp:x:14:liveuser
+nopasswdlogin:x:966:liveuser
+rfkill:x:983:liveuser
+sys:x:3:bin,liveuser
+liveuser:x:1000:liveuser

airootfs/etc/gshadow

@@ -0,0 +1,2 @@
+root:!*::root
+liveuser:!*::

airootfs/etc/hostname

@@ -0,0 +1 @@
+Antergos

airootfs/etc/locale.conf

@@ -0,0 +1 @@
+LANG=en_US.UTF-8

airootfs/etc/localtime

@@ -0,0 +1 @@
+/usr/share/zoneinfo/UTC

airootfs/etc/makepkg.conf

@@ -0,0 +1,165 @@
+#!/hint/bash
+# shellcheck disable=2034
+
+#
+# /etc/makepkg.conf
+#
+
+#########################################################################
+# SOURCE ACQUISITION
+#########################################################################
+#
+#-- The download utilities that makepkg should use to acquire sources
+#  Format: 'protocol::agent'
+DLAGENTS=('file::/usr/bin/curl -qgC - -o %o %u'
+          'ftp::/usr/bin/curl -qgfC - --ftp-pasv --retry 3 --retry-delay 3 -o %o %u'
+          'http::/usr/bin/curl -qgb "" -fLC - --retry 3 --retry-delay 3 -o %o %u'
+          'https::/usr/bin/curl -qgb "" -fLC - --retry 3 --retry-delay 3 -o %o %u'
+          'rsync::/usr/bin/rsync --no-motd -z %u %o'
+          'scp::/usr/bin/scp -C %u %o')
+
+# Other common tools:
+# /usr/bin/snarf
+# /usr/bin/lftpget -c
+# /usr/bin/wget
+
+#-- The package required by makepkg to download VCS sources
+#  Format: 'protocol::package'
+VCSCLIENTS=('bzr::breezy'
+            'fossil::fossil'
+            'git::git'
+            'hg::mercurial'
+            'svn::subversion')
+
+#########################################################################
+# ARCHITECTURE, COMPILE FLAGS
+#########################################################################
+#
+CARCH="x86_64"
+CHOST="x86_64-pc-linux-gnu"
+
+#-- Compiler and Linker Flags
+#CPPFLAGS=""
+CFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions \
+        -Wp,-D_FORTIFY_SOURCE=3 -Wformat -Werror=format-security \
+        -fstack-clash-protection -fcf-protection \
+        -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer"
+CXXFLAGS="$CFLAGS -Wp,-D_GLIBCXX_ASSERTIONS"
+LDFLAGS="-Wl,-O1 -Wl,--sort-common -Wl,--as-needed -Wl,-z,relro -Wl,-z,now \
+         -Wl,-z,pack-relative-relocs"
+LTOFLAGS="-flto=auto"
+#-- Make Flags: change this for DistCC/SMP systems
+#MAKEFLAGS="-j2"
+#-- Debugging flags
+DEBUG_CFLAGS="-g"
+DEBUG_CXXFLAGS="$DEBUG_CFLAGS"
+
+#########################################################################
+# BUILD ENVIRONMENT
+#########################################################################
+#
+# Makepkg defaults: BUILDENV=(!distcc !color !ccache check !sign)
+#  A negated environment option will do the opposite of the comments below.
+#
+#-- distcc:   Use the Distributed C/C++/ObjC compiler
+#-- color:    Colorize output messages
+#-- ccache:   Use ccache to cache compilation
+#-- check:    Run the check() function if present in the PKGBUILD
+#-- sign:     Generate PGP signature file
+#
+BUILDENV=(!distcc color !ccache check !sign)
+#
+#-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
+#-- specify a space-delimited list of hosts running in the DistCC cluster.
+#DISTCC_HOSTS=""
+#
+#-- Specify a directory for package building.
+#BUILDDIR=/tmp/makepkg
+
+#########################################################################
+# GLOBAL PACKAGE OPTIONS
+#   These are default values for the options=() settings
+#########################################################################
+#
+# Makepkg defaults: OPTIONS=(!strip docs libtool staticlibs emptydirs !zipman !purge !debug !lto !autodeps)
+#  A negated option will do the opposite of the comments below.
+#
+#-- strip:      Strip symbols from binaries/libraries
+#-- docs:       Save doc directories specified by DOC_DIRS
+#-- libtool:    Leave libtool (.la) files in packages
+#-- staticlibs: Leave static library (.a) files in packages
+#-- emptydirs:  Leave empty directories in packages
+#-- zipman:     Compress manual (man and info) pages in MAN_DIRS with gzip
+#-- purge:      Remove files specified by PURGE_TARGETS
+#-- debug:      Add debugging flags as specified in DEBUG_* variables
+#-- lto:        Add compile flags for building with link time optimization
+#-- autodeps:   Automatically add depends/provides
+#
+OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !debug !lto !autodeps)
+
+#-- File integrity checks to use. Valid: md5, sha1, sha224, sha256, sha384, sha512, b2
+INTEGRITY_CHECK=(sha256)
+#-- Options to be used when stripping binaries. See `man strip' for details.
+STRIP_BINARIES="--strip-all"
+#-- Options to be used when stripping shared libraries. See `man strip' for details.
+STRIP_SHARED="--strip-unneeded"
+#-- Options to be used when stripping static libraries. See `man strip' for details.
+STRIP_STATIC="--strip-debug"
+#-- Manual (man and info) directories to compress (if zipman is specified)
+MAN_DIRS=({usr{,/local}{,/share},opt/*}/{man,info})
+#-- Doc directories to remove (if !docs is specified)
+DOC_DIRS=(usr/{,local/}{,share/}{doc,gtk-doc} opt/*/{doc,gtk-doc})
+#-- Files to be removed from all packages (if purge is specified)
+PURGE_TARGETS=(usr/{,share}/info/dir .packlist *.pod)
+#-- Directory to store source code in for debug packages
+DBGSRCDIR="/usr/src/debug"
+#-- Prefix and directories for library autodeps
+LIB_DIRS=('lib:usr/lib' 'lib32:usr/lib32')
+
+#########################################################################
+# PACKAGE OUTPUT
+#########################################################################
+#
+# Default: put built package and cached source in build directory
+#
+#-- Destination: specify a fixed directory where all packages will be placed
+#PKGDEST=/home/packages
+#-- Source cache: specify a fixed directory where source files will be cached
+#SRCDEST=/home/sources
+#-- Source packages: specify a fixed directory where all src packages will be placed
+#SRCPKGDEST=/home/srcpackages
+#-- Log files: specify a fixed directory where all log files will be placed
+#LOGDEST=/home/makepkglogs
+#-- Packager: name/email of the person or organization building packages
+#PACKAGER="John Doe <john@doe.com>"
+#-- Specify a key to use for package signing
+#GPGKEY=""
+
+#########################################################################
+# COMPRESSION DEFAULTS
+#########################################################################
+#
+COMPRESSGZ=(gzip -c -f -n)
+COMPRESSBZ2=(bzip2 -c -f)
+COMPRESSXZ=(xz -c -z -)
+COMPRESSZST=(zstd -c -T0 -)
+COMPRESSLRZ=(lrzip -q)
+COMPRESSLZO=(lzop -q)
+COMPRESSZ=(compress -c -f)
+COMPRESSLZ4=(lz4 -q)
+COMPRESSLZ=(lzip -c -f)
+
+#########################################################################
+# EXTENSION DEFAULTS
+#########################################################################
+#
+PKGEXT='.pkg.tar.zst'
+SRCEXT='.src.tar.gz'
+
+#########################################################################
+# OTHER
+#########################################################################
+#
+#-- Command used to run pacman as root, instead of trying sudo and su
+#PACMAN_AUTH=()
+# vim: set ft=sh ts=2 sw=2 et:

airootfs/etc/mkinitcpio.conf.d/archiso.conf

@@ -0,0 +1,3 @@
+MODULES=(vmd)
+HOOKS=(base udev microcode modconf kms memdisk archiso archiso_loop_mnt archiso_pxe_common archiso_pxe_nbd archiso_pxe_http archiso_pxe_nfs block filesystems keyboard)
+COMPRESSION="zstd"

airootfs/etc/motd

@@ -0,0 +1,16 @@
+Antergos NeXT - A modern, elegant Linux distribution revived.
+
+Sources:
+https://github.com/antergos/antergos-iso-next
+
+Arch-ISO Source:
+https://gitlab.archlinux.org/archlinux/archiso
+
+Live environment will start now and let you install Antergos to disk.
+
+- The Live session runs entirely from the ISO, changes cannot be saved.
+- Hardware or driver support in the Live session may be limited.
+- The Live ISO is not intended for daily use.
+
+Welcome to Antergos NeXT.
+------------------

airootfs/etc/nsswitch.conf

@@ -0,0 +1,20 @@
+# Name Service Switch configuration file.
+# See nsswitch.conf(5) for details.
+# mdns_minimal added for local hostname resolution
+
+passwd: files systemd
+group: files [SUCCESS=merge] systemd
+shadow: files systemd
+gshadow: files systemd
+
+publickey: files
+
+hosts: mymachines mdns_minimal [NOTFOUND=return] resolve [!UNAVAIL=return] files myhostname dns
+networks: files
+
+protocols: files
+services: files
+ethers: files
+rpc: files
+
+netgroup: files

airootfs/etc/pacman.conf

@@ -0,0 +1,100 @@
+#
+# /etc/pacman.conf
+#
+# See the pacman.conf(5) manpage for option and repository directives
+
+#
+# GENERAL OPTIONS
+#
+[options]
+# The following paths are commented out with their default values listed.
+# If you wish to use different paths, uncomment and update the paths.
+#RootDir     = /
+#DBPath      = /var/lib/pacman/
+#CacheDir    = /var/cache/pacman/pkg/
+#LogFile     = /var/log/pacman.log
+#GPGDir      = /etc/pacman.d/gnupg/
+#HookDir     = /etc/pacman.d/hooks/
+HoldPkg     = pacman glibc
+#XferCommand = /usr/bin/curl -L -C - -f -o %o %u
+#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
+#CleanMethod = KeepInstalled
+Architecture = auto
+
+# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
+#IgnorePkg   =
+#IgnoreGroup =
+
+#NoUpgrade   =
+#NoExtract   =
+
+# Misc options
+#UseSyslog
+Color
+ILoveCandy
+#NoProgressBar
+#CheckSpace
+VerbosePkgLists
+ParallelDownloads = 5
+DownloadUser = alpm
+#DisableSandbox
+
+# By default, pacman accepts packages signed by keys that its local keyring
+# trusts (see pacman-key and its man page), as well as unsigned packages.
+SigLevel    = Required DatabaseOptional
+LocalFileSigLevel = Optional
+#RemoteFileSigLevel = Required
+
+# NOTE: You must run `pacman-key --init` before first using pacman; the local
+# keyring can then be populated with the keys of all official Arch Linux
+# packagers with `pacman-key --populate archlinux`.
+
+#
+# REPOSITORIES
+#   - can be defined here or included from another file
+#   - pacman will search repositories in the order defined here
+#   - local/custom mirrors can be added here or in separate files
+#   - repositories listed first will take precedence when packages
+#     have identical names, regardless of version number
+#   - URLs will have $repo replaced by the name of the current repo
+#   - URLs will have $arch replaced by the name of the architecture
+#
+# Repository entries are of the format:
+#       [repo-name]
+#       Server = ServerName
+#       Include = IncludePath
+#
+# The header [repo-name] is crucial - it must be present and
+# uncommented to enable the repo.
+#
+
+# The testing repositories are disabled by default. To enable, uncomment the
+# repo name header and Include lines. You can add preferred servers immediately
+# after the header, and they will be used before the default mirrors.
+
+#[core-testing]
+#Include = /etc/pacman.d/mirrorlist
+
+[core]
+Include = /etc/pacman.d/mirrorlist
+
+#[extra-testing]
+#Include = /etc/pacman.d/mirrorlist
+
+[extra]
+Include = /etc/pacman.d/mirrorlist
+
+# If you want to run 32 bit applications on your x86_64 system,
+# enable the multilib repositories as required here.
+
+#[multilib-testing]
+#Include = /etc/pacman.d/mirrorlist
+
+[multilib]
+Include = /etc/pacman.d/mirrorlist
+
+# An example of a custom package repository.  See the pacman manpage for
+# tips on creating your own repositories.
+#[custom]
+#SigLevel = Optional TrustAll
+#Server = file:///home/custompkgs

airootfs/etc/passwd

@@ -0,0 +1 @@
+root:x:0:0:root:/root:/bin/bash

airootfs/etc/shadow

@@ -0,0 +1 @@
+root::14871::::::

airootfs/etc/sudoers.d/g_wheel

@@ -0,0 +1 @@
+%wheel ALL=(ALL) NOPASSWD: ALL

airootfs/etc/systemd/journald.conf.d/volatile-storage.conf

@@ -0,0 +1,2 @@
+[Journal]
+Storage=volatile

airootfs/etc/systemd/logind.conf.d/do-not-suspend.conf

@@ -0,0 +1,4 @@
+[Login]
+HandleSuspendKey=ignore
+HandleHibernateKey=ignore
+HandleLidSwitch=ignore

airootfs/etc/systemd/system/getty@tty1.service.d/autologin.conf

@@ -0,0 +1,3 @@
+[Service]
+ExecStart=
+ExecStart=-/sbin/agetty -o '-p -f -- \\u' --noclear --autologin liveuser - $TERM

airootfs/etc/systemd/system/intel.service

@@ -0,0 +1,12 @@
+[Unit]
+Description=detect intel legacy gpu and install xf86-video-intel
+DefaultDependencies=no
+After=local-fs.target
+Before=multi-user.target graphical.target
+
+[Service]
+Type=simple
+ExecStart=/bin/bash /usr/bin/intel-legacy-gpu-installer
+
+[Install]
+WantedBy=multi-user.target

airootfs/etc/systemd/system/multi-user.target.wants/NetworkManager.service

@@ -0,0 +1 @@
+/usr/lib/systemd/system/NetworkManager.service

airootfs/etc/systemd/system/multi-user.target.wants/bluetooth.service

@@ -0,0 +1 @@
+/usr/lib/systemd/system/bluetooth.service

airootfs/etc/systemd/system/multi-user.target.wants/firewalld.service

@@ -0,0 +1 @@
+/usr/lib/systemd/system/firewalld.service

airootfs/etc/systemd/system/multi-user.target.wants/intel.service

@@ -0,0 +1 @@
+/etc/systemd/system/intel.service

airootfs/etc/systemd/system/multi-user.target.wants/nvidia.service

@@ -0,0 +1 @@
+/etc/systemd/system/nvidia.service

airootfs/etc/systemd/system/multi-user.target.wants/spice-vdagentd.socket

@@ -0,0 +1 @@
+/usr/lib/systemd/system/spice-vdagentd.socket

airootfs/etc/systemd/system/multi-user.target.wants/systemd-timesyncd.service

@@ -0,0 +1 @@
+/usr/lib/systemd/system/systemd-timesyncd.service

airootfs/etc/systemd/system/multi-user.target.wants/vboxclient.service

@@ -0,0 +1 @@
+/usr/lib/systemd/system/vboxclient.service

airootfs/etc/systemd/system/multi-user.target.wants/vboxservice.service

@@ -0,0 +1 @@
+/usr/lib/systemd/system/vboxservice.service

airootfs/etc/systemd/system/multi-user.target.wants/vmtoolsd.service

@@ -0,0 +1 @@
+/usr/lib/systemd/system/vmtoolsd.service

airootfs/etc/systemd/system/multi-user.target.wants/vmware-vmblock-fuse.service

@@ -0,0 +1 @@
+/usr/lib/systemd/system/vmware-vmblock-fuse.service